Appendices
Installation
33
i3PROJECTOR
manual L3502W UM
Installation
User Controls
Installation
User controls
3D
3D
Auto: When a HDMI1.4a 3D timing identification signal is
detected, the 3D image is selected automatically.
Choose “Off” to disable 3D function.
Choose “On” to enable 3D function.
3D Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute “Invert” to get best match
of left/right image sequence to get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame
Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame Se-
quential” and “Field Sequential”.
1080p @24
Use this feature to select 96 or 144Hz refresh rate as using 3D
glasses in the1080p @ 24 frame packing.
“Frame Sequential”
is supported the
DLP Link 3D input
signals from VGA /
HDMI connector.
“Frame Sequential”
/ “Field Sequential”
are supported the
HQFS 3D input sig-
nals from Compos-
ite/Svideo connec-
tor connector.
“Frame Packing” /
“Side-by-Side(Half)”
/ “Top and Bottom”
are supported from
HDMI 1.4a 3D input
signals.
