4
SET THE FM MODE SELECTOR TO “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE FM-
STEREO LED INDICATOR WILL LIGHT UP TO SHOW FM STEREO PROGRAM IS BEING RECEIVED
HINTS FOR BEST RECEPTION:
-
-
FM: THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE
SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.
PHONO
NOTED:
-
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE
ARM REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1. SELECT TO “PHONO” FUNCTION.
2. SET THE SPEED SELECTOR TO THE PROPER POSITION DEPENDING ON THE
RECORD TO BE PLAYED.
3. PLACE THE RECORD ON THE PLATE (USE THE SPINDLE ADAPTOR IF REQUIRED).
4. LIFT THE TONE ARM FROM THE REST AND SLOWLY MOVE IT TO THE RECORD SIDE.
THE PLATE WILL START TO ROTATE.
5. PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.
6. ADJUST THE VOLUME TO THE DESIRED LEVEL.
7. AT THE END OF RECORD, THE PLATE WILL AUTOMATICALLY STOP ROTATING. LIFT THE TONE ARM
FROM THE RECORD AND RETURN IT TO THE REST.
8. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.
REMARK
: AT SOME OF THE RECORD, THE AUTO-STOP AREA IS OUT OF THE UNIT SETTING, SO IT WILL STOP
BEFORE THE LAST TRACK FINISH. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (16) TO “OFF“ POSITION,
THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN OFF THE UNIT
BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH TO “ ON “ POSITION TO STOP THE PLATE
TO ROTATE). THEN PUT BACK THE TONE ARM TO THE REST POSITION.
STYLUS (NEEDLE) REPLACEMENT
Replacement of a worn stylus can be easily accomplished as follows.
1. Raise the "Tone Arm".
2. To remove stylus, pull out the stylus assembly in direction shown (1) (2), holding the head shell with your other hand.
3. Then install the new stylus by pushing it gently into the cartridge (3) (4) (hold by the sides to prevent damage to
stylus) until it clicks into place.
When the stylus eventually needs replacing, a replacement stylus is available for purchase directly from the
manufacturer: www.i360online.com or [email protected]
LINE OUT CONNECTION
YOU CAN CONNECT THE SYSTEM TO YOUR HI-FI SYSTEM BY CONNECTING THE LINE OUT SOCKET (14) TO
THE AUXILIARY INPUT SOCKET WITH A RCA CABLE (NOT INCLUDED).
CONNECTING TO A COMPUTER FOR RECORDING
Before getting started, please install the “AUDACITY” recording software onto your computer. Below is an
example using a computer with Microsoft XP and the Audacity software installed. For other Windows OS
or Mac OS, please visit Audacity website for details.
http://audacity.sourceforge.net/
INSTALLING THE AUDACITY SOFTWARE
1. Insert the Audacity disc (included) into the CD drive of your computer.
2. Click on My computer on the desktop.
3. Double click CD drive to view the contents of the CD and select “Windows” under “Audacity” folder.
4. Open “Windows” folder and select “Audacity 2.0.3 (Windows 2000, XP, Vista, 7, 8)”.
5. Double click Audacity set up icon with file name “audacity-win-2.0.3” to install the Audacity software
according to the instruction, read license agreements of Audacity before installation.
Note:
Free software (AUDACITY) licensed under the GNU general public license (GPL).
