3
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
LOCATION OF CONTROLS
1) DUST COVER
2) DIAL POINTER
3) LEFT SPEAKER
4) POWER OFF/FUNCTION SELECTOR
5) VOLUME KNOB
6) 3.5MM STEREO HEADPHONE JACK
7) RIGHT SPEAKER
8) FM MODE: FM/FM STEREO SELECTOR
9) TUNING KNOB
10) FM STEREO LED INDICATOR
11) SPINDLE ADAPTOR
12) TURNTABLE SPEED SELECTOR
13) PICK-UP HOLDER
14) LINE OUT SOCKET
15) FM ANTENNA
16) AUTO STOP SWITCH
17) AC CORD
18) USB PORT FOR COMPUTER CONNECTION
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE ALL
OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE POWER CORD TO THE AC OUTLET
2. SWITCH THE FUNCTION SELECTOR TO “TUNER“ FUNCTION. IF THE BACKGROUND OF THE DIAL SCALE
IS LITE UP WITH AMBER LIGHT, IT MEANS THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS
READY TO PLAY THE MUSIC.
3. TO ENCODE THE VINYL SIGNAL TO YOUR COMPUTER, CONNECT THE USB PORT (18) OF THE
TURNTABLE TO A SUITABLE USB PORT ON YOUR COMPUTER VIA THE USB CABLE PROVIDED.
Due to ErP stage two requirement and protect the environment, the unit will switch
to standby mode automatically when no music has played for over 15 minutes.
LISTENING TO RADIO
MANUAL TUNING
1. SLIDE THE “FM MODE” BUTTON AND SELECT THE DESIRED BAND (FM OR FM-STEREO).
2. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB.
3. ADJUST VOLUME KNOB TO THE DESIRE VOLUME LEVEL.
FM & FM-STEREO RECEPTION
SET THE FM MODE SELECTOR TO THE “FM” POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. IN
PARTICULAR WHEN STEREO SIGNAL ARE TOO WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM
IN MONO.
