i3HUDDLE
QUICK START GUIDE
230V-AC
power cable
RJ45 WAN
network cable
CONNECT POWER AND NETWORK CABLES
EXTERNAL COMPUTER CONNECTION
HDMI
cable
USB
cable
POWER &
i3SYNC BUTTONS
1. Connect the power and network cables
2. Turn on the i3HUDDLE
3. Pair i3SYNC transmitters
3.1. Press and hold the i3SYNC button on the side of the i3HUDDLE for 5 seconds
to enter SETTING MODE.
3.2. Press and hold the Transmit button, then turn on the i3SYNC transmitter.
Hold the transmit button until the light flashes blue.
3.3. When synchronization is complete, a message will be displayed on the screen.
The IP address of the transmitter that has been connected will appear on the
upper right side of the screen.
3.4. Press and hold the i3SYNC button on the side of the i3HUDDLE for 5 seconds
to switch back to LIVE MODE.
3.5. When you press the Transmit button, the screen transfer will start.
4. For further configuration, use the settings menu
TRANSMIT
ON/OFF
