Veo16p
QUICK START GUIDE
i3 INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
U.S.A 4450 Witmer Industrial Estates Unit 4
Niagara Falls, NY 14305
Canada 780 Birchmount Road, Unit 16,
Scarborough, ON, M1K 5H4
i3-TRNG-DVR-
Veo16p-QSG
.indd
met to connect to your Veo16p through the Internet Explorer:
Browser:
Internet Explorer 7.0
or later
CPU: Pentium 4, 2.0 Ghz or higher
RAM: 512 MB
1.
In the IE address bar, enter Veo16p’s IP Address, followed by Web Service port.
(Default is 8080). E.g. http://192.168.0.59:8080
2.
In the login window enter the user name and password.
3.
Click the warning bar to install ActiveX (required). When the security warning
window appears, click
Install
.
4.
Once ActiveX installation is completed, you will see the live screen.
CONNECTING REMOTELY via INTERNET EXPLORER
Internet
Start by configuring your HVR for remote access.
1.
Connect a Gigabit switch to your Veo16p WAN port to connect the system to the
Internet.
2.
Connect a switch with up to 16 supported i3 IP cameras (Ax45/47/67) to your
Veo16p LAN port
3.
In the status bar, go
MENU > SYSTEM SETUP > NETWORK > IP SETUP
4.
Uncheck the DHCP checkbox and enter the HVR’s IP Address information
manually:
GATEWAY, SUBNET MASK, 1ST, 2ND DNS SERVER.
5.
If using i3 IP cameras, check the
USE
checkbox under LAN section to enable the
LAN port and enter the
IP ADDRESS
and
SUBNET MASK
manually.
6.
Configure port forwarding for RTSP and Web Service ports
by clicking
AUTO PORT FORWARDING
.
Default value of the Web Service port is
8080
.
Default value of the RTSP Service port is
5554
.
7.
Click
APPLY
and exit the menu.
Internet Explorer
The following minimum system requirements must be
CONNECTING REMOTELY via i3 VEO MOBILE APP
The default username and
password:
Username:
ADMIN
Password:
1234
To connect to your Veo16p using your iPhone or an Android smartphone,
download and install i3VEOMobile app.
1.
Launch the app and tap the plus
sign (+) to add a new Veo16p to the
list of connections.
2.
Fill out your Veo16p connection information:
-
HVR Nickname (e.g. Store #123)
-
IP Address or domain name
-
HTTP Port (Web Service port. Default is
8080
)
-
RTSP Port
-
Username (Default is
ADMIN
)
-
Password (Default is
1234
).
3.
Click
Save
to add the HVR to the list.
4.
Tap the HVR icon in the connections list to connect.
5.
Tap the screen to see on-screen controls. You can change the split screen mode, turn
Audio ON/OFF, control PTZ cameras, or access Search or Setup modes.
Internet
Remote PC
Smartphone
ADSL modem
Broadband
Router
Direct
Connection
Local PC
Local PC
Switch w/ up to 16 i3 IP cameras