To change the parameter anywhere within the menu, select it and press the ENTER button. This will
activate the editing mode: the green box around the parameter will change to yellow. This means that
the setting can now be adjusted. To adjust, use the ARROWS Up/Down to browse through available
settings. Keep pressing the Up/Down ARROWS until the desired setting is selected, then press the
ENTER key to exit the editing mode.
To save the changed parameters, always select APPLY option in the menu screen and press the ENTER
button before closing out of the menu.
To discard the changes, press RETURN button to close out of the menu screen without saving.
OSD (ON-SCREEN-DISPLAY) MENU
OSD (On-Screen Display)
•
Status bar:
Turn this setting ON to display the status bar on the bottom of the screen.
The setting affects all video panes, i.e. live or playback modes.
•
Camera Title:
Turn this setting ON to display the camera title (if it exists). The setting affects all
cameras connected to the Veo 120XXN. To set up a camera title, use the Camera Menu. Please
refer to page 19 for more information
•
Event Icon:
Turn this setting ON to display the video recording status on the main screen. A red
square indicates that the video is being recorded; green indicates that the video is being pre-
recorded into a buffer. The recording status appears for each camera that is connected to
the Veo 120XXN.
•
Border:
Turn this setting ON to display the border between each camera view in the quad display mode.
•
Border Color:
Select the border color for the multi-screen divisions. Choices are White, Blue, Red,
Yellow, Green, and Gray.
•
Menu Transparency:
Select the level of transparency (0-100) of the menu display and the status
bar on the video pane. The higher the value, the more transparent the menu display becomes.
•
Motion Sensor:
Set the Motion Sensor to either OFF, ACTIVE or INACTIVE.
OFF: No visual alert is displayed when the motion is detected in the configured area.
ACTIVE: Area blocks with detected motion are colored on the screen.
INACTIVE: Area blocks without motion are colored on the screen.
In order for this function to work, motion detection area has to be configured for chosen cameras in
Motion Sensor setup (see page 33).
•
Motion Color:
Set the Motion Color to Red, Green, Blue or Yellow. This color pertains to the
Motion Sensor function.
•
Motion Transparency:
Set the Motion Transparency to 0, 1, 2, or 3, where 3 is solid and 0 is
transparent. This function determines the transparency of the motion sensor color.
Figure 17. OSD Display Menu
17
