ADD VIDEO INPUTS to SRX-PRO v7
Make sure to set unique IP address to every IP camera/encoder before adding it to
SRX-Pro v7. Use i3’s ACT (Annexxus Configuration Tool) utility for i3 cameras and
encoders. ACT is pre-installed on your NVR.
1.
Launch i3 Pro Setup from the Desktop or from the SRX-Pro Monitor.
2.
Enter
your administrator
Username
and
Password
and click
LOGIN.
3.
Click the
Add
tile.
4.
All i3 and third party cameras and encoders recognized by i3’s GiPi and ONVIF
will be shown in the UNASSIGNED CAMERAS tab.
5.
Enter correct login credentials for all devices with “Login failed”
symbol
(if any).
Select all “Login failed” devices that share login credentials and click
.
6.
Enter device’s
Username
and
Password
and click
Green checkmark
indicates that the camera/encoder is ready to be added.
7.
Select all devices with a green checkmark and click
.
Your cameras/encoders have now been added and are set to record based on Sensor
+ Motion schedule.
RESOLUTION / FRAME RATE / CHANNEL ORDER
To make setting changes to added cameras, click the
List
tile.
1.
Select one or cameras and click
2.
In the Edit camera(s) window, adjust Resolution and FPS settings for the
Main and Sub streams, PTZ (Enable/Disable), and/or Audio and click
SAVE.
3.
To rearrange the channel sequence, click on the ellipsis icon
and
click
Channel Index
. Drag-and-drop camera thumbnail to swap two
channels, or use the drop-down next to each thumbnail to pick preferred
channel position. Repeat for all thumbnails.
U12, 16-channel NVR with PoE
QUICK START GUIDE
i3 INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
Adjust the Time Zone
All NVR units sold by i3 international are pre-set to Eastern Time zone (UTC -5:00). If
your NVR is in a different time zone,
you must set the correct time zone on the first
system start up.
If the NVR is later re-located to a different time zone, this setting must be changed
again. All previously-recorded data must be formatted after each time zone change.
Failure to do so may result in system malfunction.
To change your NVR time zone, unlock the NVR first, then Go to Start menu and type
Control Panel. In Control Panel, click
Date and Time
>
Change time zone...
Set your NVR’s Time zone from the drop-down menu and click
OK
.
LIVE VIDEO
Use Video Pilot Client application (pre-installed on your NVR) to view Live video and
to Search/Backup recorded video.
1.
Launch i3 Video Pilot Client from the Desktop or from the SRX-Pro Monitor.
2.
Mouse over
localhost
tile and click
Connect
.
3.
Login using SRX-Pro administrative or user credentials
If using Guest account to view Live localhost video, you must
Login
before
being able to Search or Backup video. To protect the security of your system,
Logout when done.
Tip:
To view Live video instantly using Guest account,
go to
SRX-Pro Setup > Server > User
management > User groups
and edit the
Idle
group. In Permissions, expand Live - Search - Backup
drop-down and enable Live mode
for all or
select cameras.
• Double-click on any channel to bring it into Full Screen mode.
• Hover over any channel to see on-screen control panel.
• Click on the screen division icon to change current display mode.
• Use the Search bar to quickly locate camera by camera name, model or IP.
Or
U12 Recommended
Settings:
Main Stream:
1.3MP @ 3fps
Sub Stream:
CIF @ 10fps
Or
