4
2. Safety cord
The safety cord prevents the dome casing from falling. To avoid personal
injury and liability, do not remove the safety cord from the unit. If it is
necessary to remove the cord, remember to fasten the screws provided.
3.
Zoom & Focus lever
Adjusts the camera range and focus. The lever itself is a screw and can be
removed. Turning this screw completely clockwise locks the position.
4. UTP-Unshield Twisted Pair (white/black wire)
Twisted Pair (TP) terminal (CAT.5E) for video signal. Usage of TP output
requires a TP receiver at the other end of the TP line.
5. Power connector (red/black wire)
Connects to the external power source. (DC12V/AC24V)
6.
BNC connector
Connects to the VIDEO IN connector of the Monitor Video Connector
7.
Level adjustment switch
Use to compensate for the Iris Level. Turn towards L (low)/ H (high) to make
the picture appear darker/brighter.
8. DIP Switches for Mode setting
BLC
(Back Light Compensation). Factory setting: OFF
When switched ON, this function compensates the exposure for the scenes,
where the subject is lit from behind.
AGC
(Automatic Gain Control). Factory setting: ON
This function automatically adjusts the picture in accordance with the subject
brightness.
DC/AES
switch. Non-functional switch. Reserved for future development
Flickerless
. Factory setting: OFF
When switched ON, this function reduces flickers on a NTSC/PAL cameras
used with 50Hz/60Hz power frequency.
NOTES OF USE
This camera features the SONY® CCD combined with SONY’s latest
advances in digital signal processing (DSP) technology to enable day/
night monitoring and surveillance applications, as well as effectively
handle other challenging lighting conditions including backlighting, bright
sunlight and deep shadows.
SONY CCD & DSP
