5
NOTES OF USE
Dip Switch Function Description
1. Auto Gain Control (N-AGC / S-AGC)
N-AGC (Normal): Standard position, GAIN = 24dB.
S-AGC (Super): High-sensitivity position, GAIN = 30dB.
2. Back Light Compensation (ON / OFF)
ON: The BLC function is on
OFF: The BLC function is off.
3. SYNC System (L-LOCK/ INT)
L-LOCK: The camera is in the Line-lock mode. Adjust degrees by with
V-PHASE control on the side panel.
INT: The camera is in the internal SYNC mode.
4. Picture sharpness (SOFT / SHARP)
Picture sharpness selection.
5. Auto White Balance (ATW1 /ATW2)
TTL auto trace white balance algorithm is designed to implement a
perfect colour reproduction.
ATW1: Colour temperature range: 2500oK~6000oK.
ATW2: Colour temperature range: 2500oK~9500oK.
6. ICR Mechanism (CL / AUTO)
Choose the Day / Night mode by setting the dip switch to Auto or Colour
position.
Colour: The camera will remain in Colour mode.
Auto: The camera will automatically switch between Colour or B/W modes
according to the brightness of the scene being shot.
Configure a switchover point from
Colour
to
B/W
mode by selecting HIGH,
MID or LOW with a slide switch.
LOW: The switchover point of brightness from Colour to B/W is 1 lux (~ 10S)
MID: The switchover point of brightness from Colour to B/W is 2 lux (~ 10S)
HIGH: The switchover point of brightness from Colour to B/W is 3 lux (~ 10S)
The switch-over point of brightness from B/W to Colour mode is 8 lux (~ 10S)
7. Exposure Control (AES / AI)
ON: Auto electronic mode(AES)
The shutter speed varies from 1/50(60) sec to 1/100,000 sec depending on
the environmental conditions.
OFF: Auto IRIS mode(AI). Note: This function applies to DC lenses only.
After the AES dip switch is set to OFF position, adjust the LEVEL pot on the
back panel of the camera to get a clear picture.
