CAMERA PARTS AND DEFINITIONS
Quick Start Guide
1.3/3MP Infrared Mini Outdoor IP Dome Camera
Ax47R/Ax67R
SAFETY
When installing your Ax47R/Ax67R camera be sure to avoid:
•
excessive heat, such as direct sunlight or heating appliances
•
contaminants such as dust and smoke
•
strong magnetic fields
•
moisture and humidity
•
areas with mechanical vibrations
•
fluorescent lamps or objects that reflect light and unstable light sources
•
temperatures below -20° C (-4° F) and above 50° C (122° F
).
POWER SUPPLY
Ensure the supplied voltage meets the power consumption requirements of this camera
before powering the camera on. Incorrect voltage may cause irreparable damage to the
video camera and will effectively void the camera warranty.
CLEANING
•
For maximum optical clarity, the camera dome or lens must remain clean. Use a soft,
dry cloth to remove finger prints or dust from the dome cover.
•
Use a blower to remove dust from the lens.
•
Do not use volatile solvents such as alcohol, benzene, or thinners, as they may dam-
age the surface finishes.
POWER SUPPLY
To avoid electrical shock and to preserve the product warranty, DO NOT disasemble the
camera. Refer servicing to qualified personnel only.
PACKAGE CONTENTS
Ensure that the items received match those listed on the order form and the packing slip.
In addition to this manual and a fully assembled camera, the dome camera packing box
includes:
1. 3 ft network cable x1
2. Dessicant (attach to the inside of the Inner Liner).
3. Surface Mount template x1
4. Security torx bit x1
5. Round Head Screw (Tapping Type) x3
6. Plastic Anchor x3
i3-TRNG-CAMS-
Ax47R_67R-QSG
.indd
Rev.
160824
1. Mounting holes (x3)
2. Dome bubble housing / Dome cover
3. Screws securing the dome bubble housing to camera module (x3, silver)
4. Lexan bubble
5. Screws attaching camera module to the camera base (x4, black)
6. Tilt bracket with two locking screws. Loosen the screws and tilt to adjust
lens angle.
7. Inner Liner / Shroud. Attach the dessicant to the inside of the Inner Liner, without
obstructing the lens movement.
8. IR board
9. Camera Lens Assembly. Pan to adjust lens angle.
10. Lens base. Rotate to adjust lens angle.
11. Camera lens.
12. RJ45 Ethernet PoE Port with waterproof RJ45 connector assembly.
Insert an Ethernet cable into the port for network connection as well as PoE (Power
over Ethernet) capability. To maintain water-resistant rating in outdoor installations,
make sure to use the included waterproof RJ45 Connector assembly.
13. Reset/Default button. Press for 1 second to reboot the camera. Press for 6 seconds
to restore camera settings to factory defaults.
14. MicroSD Card slot for on-camera video storage. (MicroSD card sold separately).
110.97 mm
82 mm
3
4
2
5
6
8
7
9
11
10
12
13
14
50.5 mm
1
1
1
3-Ø4.5 holes
( for plastic anchor )
Cable hole
Logo Direction
3
4
5
6
2
1
Please Note:
Visit www.i3international.com to view and download the full User Manual
for this camera. Also available for download is the
AnnexxusConfigurationTool
or ACT
program used to locate and configure your cameras with your SRX-Pro software. This
program is already installed in SRX-Pro v3.3.3.69 and higher. Please contact our Technical
Support team if you have any questions or concerns regarding camera installation or you
require software services or support. Technical support can be reached by email at:
or by phone toll free
1.877.877.7241.
