2
Product Application Diagram
The Ethernet over UTP (Coaxial) Cable system provides high power for the IP devices such as IP PTZ camera.
The system supports virtually any type of Cat. UTP wire, including such as Cat.5, 5e, 6, or 7 cable. And different
wire types can be concatenated together, as needed. It also supports the coaxial cable.
To avoid the interference signal, we strong recommend using the Cat. STP cable for Ethernet/PoE signal
transmission when there are more 16 pcs EPOC-131VA/131VAJ install at the same Hub site.
Application Diagram
The IP camera and EPOC-131HP cannot receive power through the UTP cable. Please do as below:
1.
POE+ Hub or plug DC56V power adapter for EPOC-131VA or EPOC-131VAJ.
2.
Plug the DC48V power adapter into the EPOC-131HP-O will be needed at this end. Please refer to “
Power
Wattage VS. Cable Distance
” table or visit
Power Wattage VS. Cable Distance
