8.
Instructions for Use
1. Remove the water tank by pressing the Water Tank Release Button.
2. To remove the water tank cap twist to open.
3. Fill the water tank with filtered or distilled water. Do not overfill the
tank. Replace the water tank cap ensuring that there are no leaks.
4. Insert the water tank back into the cleaner ensuring that it clicks into
place.
WARNING! Do not add any cleaning solution, detergent, vinegar or bleach into the
water tank. This will cause damage to the steam mop. Do not use hot or boiling
water to fill the water tank.
WARNING! Disconnect the power plug from the power supply before filling the
water tank. Ensure that the water tank is installed securely into the cleaner before
connecting the power plug to the power supply.
Before You Begin Cleaning