background image

Important safety insturctions

2/16

Product Specification

01. Please read these instructions carefully before using the product and save for later reference.
02. Follow all warnings and instructions marked on the product. 
03. Unplug this product from the wall outlet before cleaning. Clean the product with a damp soft

03.

 cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage to the screen. 

04. Do not use this product near water.
05. Do not place this product on an unstable cart, stand, or table.

05.

 The product may fall, causing serious damage to the product.

06. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure

06.

reliable operation of the product and to protect it from overheating, these openings must not be

06.

blocked or covered.

06.

The openings should never be placed near or over a radiator or heat register,  or in a built-in

06.

installation unless proper ventilation is provided.

07. This product should be operated from the type of power indicated on the marking label.

07.

 If you are not sure of the type of power available, consult your dealer or local power company.

08. This product is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin.

08.

 This plug will only fit into a grounding-type power outlet.

08.

 This is a safety feature.  If you are unable to insert the plug into the outlet, contact your

08.

 electrician to replace your obsolete outlet.

08.

 Do not defeat the purpose of the grounding-type plug.

09. Do not allow anything to rest on the power cord.

09.

 Do not locate this product where persons will walk on the cord.

10. If an extension cord is used with this product, make sure that the total of the ampere ratings on

10.

the products plugged into the extension cord does not exceed the extension cord ampere rating.

10.

Also make sure that the total of all products plugged into the wall outlet does not exceed

10.

15 amps.

11. Never push objects of any kind into this product through cabinet slots as  they may touch

11.

dangerous voltage points or short out parts that could result in a risk of fire or electric shock.

11.

Never spill liquid of any kind on the product.

12. Do not attempt to service this product yourself, as opening or removing covers may expose you to

12.

dangerous voltage points or other risks and will void the warranty.

12.

Refer all servicing to qualified service personnel.

13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under

13.

the following conditions:

13.

   a. When the power cord or plug is damaged or frayed.

13.

b. If liquid has been spilled into the product.

13.

c. If the product has been exposed to rain or water.

13.

d. If the product does not operate normally when the operating instructions are followed.

13.   d.

 Adjust only those controls that are covered by the operating instructions since  improper

13.   d. 

adjustment of other controls may result in damage and will often require extensive work

13.   d. 

by a qualified technician to restore the product to normal operation.

13.

e. If the product has been dropped or the cabinet has been damaged.

13.

f. If the product exhibits a distinct change in performance, indicating a need for service.

Summary of Contents for YPM1040PHB

















Reviews: