I-Tech WEPERE RESTART, User Manual

Page: 15 / 28

15 USER MANUAL
The device does not require sterilisation.
Notes:
- Never use solvents for cleaning. Cleaning agents can damage the device.
- Carry out routine maintenance, in particular:
• inspect the body of the device for cracks or fissures, which may allow liquids to enter;
• inspect the cables.
TRANSPORT AND STORAGE
Transport precautions
There is no particular care to be taken during transport as RESTART is a portable device. However,
it is recommended to put RESTART and its accessories in the bag provided after each use. Protect
the device from intense heat, direct sunlight and liquids. Store the device in a cool and well venti-
lated environment. Do not place heavy objects on top of the device.
Storage precautions
The storage location should have the following characteristics:
During operation ambient temperature from +5 to + 40°C
relative humidity from 15 to 93%
pressure from 700 to 1060 hPa
In the bag provided ambient temperature from +5 to +40 °C
relative humidity from 15 to 93%
pressure from 700 to 1060 hPa
Troubleshooting
Any type of work on RESTART must only be carried out by the manufacturer or authorised dealer.
In any case, before sending RESTART to the manufacturer, it will be necessary to ascertain the
exact nature of the RESTART malfunction. Check the following:
PROBLEM POSSIBLE CAUSE SOLUTION
The device does not turn on
Adapter contact error Make sure the adapter
is connected.
Check the following contacts:
• All contacts are fine
• All contacts are not broken
• The battery is O
The device does not work
The battery is damaged
The LED indicators do not light up
Mains plug not inserted correctly
in the power socket.
Check the operation of the power
socket.
Mains cable not correctly
inserted in the connector
of the device.
Insert the plug and cable
correctly into the connector
of the appliance.
Mains cable worn and broken. Replace the mains cable.