I-Tech UE, User Manual

Page: 34 / 56

IACER Srl 34 MNPG118-02
3. The electrodes should be placed on the
treatment area and hold down using the
elastic belt supplied with the device. Insert
the cable with the Red (+) connector into
one rubber electrode. Insert the cable with
the Black (-) connector into the other rubber
electrode. Make sure that the connectors
are inserted completely into the electrode.
OPTION 1
: Insert the rubber electrode into the wet
electrode sponge.
OPTION 2 : Put conductive gel on the rubber
electrode surface before placing it on the skin.
Note: use only CE marked gel or supplied by
the manufacturer.
4.
Use elastic belts to keep the electrodes in the
right position.
Operative instructions
Pay attention to the follow indications to start electrotherapy treatment:
1.
Connect the black/red cables to the sockets on
the electrotherapy cables and connect this cable
to the socket (12) on the back side of the device.
2. Connect the electrodes to the electrotherapy
cables following the instructions of the previous paragraph.
3. Switch on the device pressing ON/OFF button placed laterally, next to
power supply socket.