background image

 

I.A.C.E.R. Srl 

                  MNPG273-00 

Classifications 

In accordance with point 1.1 of Annex IX of DIRECTIVE 93/42/EEC 
(and subsequent amendments), the MAG3000  is a type of device 
designed for continuous use for less than 24 hours. According to point 
1.4 of the same annex, the device relies on an electrical energy source, 
therefore it is considered as an active medical device. With reference to 
point 1.5 of the mentioned annex,  the MAG3000  is an active 
therapeutic device, as it is intended for the treatment of various types of 
conditions.  In accordance with Rule 9, paragraph 3 of Annex IX of 
Directive 93/42/EEC, all active therapeutic devices intended for the 
administration or exchange of energy are in Class IIa unless their 
characteristics are such as to enable them to release energy to the 
human body or exchange energy with the human body in a potentially 
dangerous form, taking into account the nature, density and part where 
the energy is applied, in which case they fall into class IIb. Considering 
the fact that pulsed magnetic fields do not fall into the category of 
ionizing  radiation, and that do not involve direct application of electric 
current on the patient, it can be said that the energy exchanged by the 
device with the human body is not at all dangerous. 

Therefore, the devices of the LaMagneto line are active medical 
devices belonging to class IIa.  With regard to the second sentence of 
Annex IX, "If several rules apply to the same device, based on the 
performance specified for the device by the manufacturer, the strictest 
rules resulting in the higher classification shall apply to the device of the 
LaMagneto line. Therefore the classification is IIa. 

 

The MAG3000 device assumes the following classifications: 

 

Class II with type BF applied part (Classif. IEC EN 60601-1); 

 

Device with IP21 degree of protection against the penetration of 
solid objects, powders and liquids. 

 

Device and accessories supplied non-sterile and not subject to 
sterilisation; 

 

Device not suitable for use in the presence of a flammable 
anaesthetic mixture with air, with nitrous oxide, with any flammable 
agent of any kind and in environments with a high concentration of 
oxygen; 

 

Device intended for continuous operation; 

 

Device not suitable for external use. 

Summary of Contents for MAG3000









































Reviews: