INSTALLATION
Where to Place the Switch
The enclosure of the JKP1 Switch is designed for standalone or rack-mount configuration. The Switch is
natively rack-mountable in a standard 1U (19”) server rack. Rack-mount hardware is included with your
switch for a sturdy rack installation.
Cautions and Warnings
Avoid placing cables near machines that create electrical noise such as fluorescent lighting, air
conditioning equipment, etc.
Important Information
Before you begin, make sure that power to all the computers you will be
connecting has been powered off.
To prevent damage to your installation due to ground potential difference, make
sure that all computers on the installation are properly grounded. Failure to
follow these instructions can result in damage to computers and / or the Switch.
Installing the Switch into a Server Rack
Unlike other traditional rack mounted LCD KVM units the JKP1 series requires only one person for
installation. The JKP1 series includes 2 adjustable sliding rack mount brackets for installation in 19-inch
rack systems. The sliding brackets feature adjustable positions for rack depths of 22-36 inches.
Important Information
Installing and or removing the Switch (module and chassis) improperly could void
your warranty. If you are uncertain what to do please contact our technical support.
