i-tec ADUANCE Series, Uswrs Manual

Page: 4 / 20

INTRODUCTION
This is the USB 3.0 HUB for easy connection up to 7 USB devices (USB 3.0/2.0/1.1) to your computer via one USB
cabel. Thanks to its construction it has USB charging detection. Each of 7 USB ports supports the charging function,
but only two side USB port has BC 1.2 specification (for charging iPAD or Samsung tablet). You can extend length of
connection by extra USB cable type A-Male / Type A Female (note: extra cable is not part of package).
USB HUB is installed automatically, no need install drivers. Connect a power adapter (included into the package) to
the USB HUB and then plug the USB HUB (by using USB cable) into available USB port (USB 3.0, 2.0 or 1.1
standard) of your PC/NB and follow the on-screen instructions. USB HUB will be installed and displayed in Device
manager as “Generic USB HUB” and “USB 3.0 HUB”.
PRODUCT OVERVIEW
1. DC power jack – connect to the supplied power adapter
2. USB 3.0 outpot ports (2 ports) – with spec. BC 1.2 – connect to a USB device
3. USB 3.0 input port – for connect to a PC/NB – USB 3.0 type B
4. LED indicator – power on
5. USB 3.0 outpot ports (5 ports) – connect to a USB device
INSTALLATION IN WINDOWS XP/ VISTA/ 7 /8, MAC OS X AND HIGHER
EN
04
i-tec USB 3.0 Charging HUB
E
N
G
L
IS
H