20
8
Troubleshooting
Problem
Cause
Solution
Connection leaks
Loose connection
Tighten connection.
i-wash® Basic or Pro Reach does
not spray
No water supply
Check that the water supply
connection is correctly
connected.
i-wash Basic or Pro Reach is
clogged
Flush the hoses with water
and check the pencil jet or fan
sprayers of the brush for dirt.
Carbon from the tubes wears out
Intensive use
Stick electrical tape on worn
out spots.
Yellow clamp breaks
Intensive use
Glue with two-component
adhesive.
Replace the yellow clamp.
Carbon tube gets stuck
Dirt or loose carbon fibers
Spray WD-40 between the
tubes, after the tubes get
unstuck, carefully clean them.
Tube breaks
Tube has been extended too
far out or working angle too big
Replace the tube.
