29
8.
Place the head (Figure 24, pos 1) back on
the can.
9.
Fasten the latches (Figure 25, pos 1).
10.
Replace the battery (Figure 25, pos 2).
Figure 24
Figure 25
7.2
Brush and tool condition
Check the condition of the brush or tool for wear and tear before use. Only change the brush or tool
when the machine is turned off.
7.3
Damaged or worn parts
Damaged or worn parts need to be replaced immediately. Contact your local i-team Global partner
or visit www.i-teamglobal.com for more information.
