i-team i-vac 5, User Manual

Page: 26 / 29

26
8 Trouble shooting
Problem Cause Solution
No power/ green light in
ON/OFF switch does not burn
Main power cable broken Replace main power cable.
Main power cable not plugged in Plug in main power cable.
No electricity in wall socket
Check the wall socket.
ON/OFF switch off Turn on ON/OFF switch.
i-vac 5® stops working Motor overheated, a thermal
switch stopped the motor
Let the i-vac 5 cool down.
Check the filters, dust bag
and hose: see 6.3.2. and
6.3.3.
Wait approximately 30
minutes.
Start the i-vac 5 by pushing
the ON/OFF switch.
Little suction power Filter bag full Turn off the i-vac 5 and
replace filter bag.
Filter is full Turn off the i-vac 5 and
Replace filters.
Hose blocked Turn off the i-vac 5 and
remove blockage.
Wand blocked Turn off the i-vac 5 and
remove blockage.
Tool blocked Turn off the i-vac 5 and
remove blockage.
Hose not well attached Turn off the i-vac 5 and
reconnect hose.
Head not well placed on can Turn off the i-vac 5 and
replace the head on the
can.
i-vac 5 makes strange sound Motor is broken Change motor.
Carbon brushes are worn Change motor.
Hose blocked Turn off the i-vac 5 and
remove blockage.
Dust bag is full Turn off the i-vac 5 and
change dust bag.
i-vac 5 smells strange Filter is full Turn off the i-vac 5 and
Replace filter.
Dust bag is full Turn off the i-vac 5 and
change dust bag.