22
6.
Operation
6.1.
Before you start
Check the brushes and squeegee for wear and tear, see chapter 7 for maintenance
instructions.
6.1.1
Inserting the battery
CAUTION
Only use i-power
®
batteries specifically designed for use in imop
®
devices.
Figure 13
1.
Put the imop Lite in store position, see section 4.2.
2.
Push the battery (Figure 13, pos 1) in the battery slot. A click indicates that the battery is
locked in place by the retaining clip (Figure 13, pos 4).
3.
During operation, you can check the amount of power left (Figure 13, pos 2) by pressing
the power indicator (Figure 13, pos 3) on the battery.
TIP:
It is not recommended to use the battery when charged below 40%.
