22
The filling opening is closed by a white
rubber cap.
3.
Gently open the white rubber cap.
4.
Pull out the black filling hose
(Figure 15, pos. 1).
5.
Completely fill the clean water tank with
clean water, see Figure 15.
Note: When filling the clean water tank,
make sure that the tank is lower than the tap
point! By doing so:
•
The water flows freely in the tank.
•
You will prevent water spillage.
Figure 15
6.
Push back the black filling hose in the
clean water tank.
7.
Close the white rubber cap.
8.
Slide the clean water tank back into the
co-botic
™
45 using the blue handles, see
You will hear a clicking sound indicating that
the clean water tank is properly locked.
Figure 16
6.2
Setting up the co-botic 45
6.2.1
Powering-on and unlocking the co-botic 45
1.
Press the power button in front of the battery (Figure 11, pos. 3), the co-botic 45 will now
power on.
2.
Enter the 4-digit password on the display to unlock the co-botic 45.
The default
password is 1234.