20
5.2
Assembly
5.2.1
Charging the battery
Charge the battery according to the instructions in the battery charger manual. Make sure the
battery is charged regularly.
5.2.2
Inserting the battery
CAUTION
Only use i-power
®
batteries specifically designed for use in the co-botic
™
45.
1.
Open the battery compartment lid using
the supplied key (Figure 11, pos. 1).
2.
Push the battery in the battery slot
(Figure 11, pos. 2). A click indicates that
the battery is locked.
3.
Close and lock the battery compartment
lid.
Figure 11
5.2.3
Charging the remote control battery
To charge the remote control battery, you must use the supplied USB-C to USB-A cable.
To charge the remote control battery, do the
following:
1.
Connect the USB-C connector from the
USB-C to USB-A cable to the USB-C port
(Figure 12, pos. 1) of the remote control,
see Figure 12.
2.
Connect the USB-A connector to the
USB-A port of a power adapter or a
laptop.
The battery will be charged.
Figure 12
