USB 3.0-to-SATA II RAID Subsystem
User’s Manual
35
NOTE: In the left panel of the RAID and Disk Information, the status
of a hot spare disk will be shown as “S0” for first host spare, “S1” for
second hot spare, and so on.
Disk Information:
Model Name
– Shows the disk drive model
Serial Number
– Shows the disk drive serial number
Firmware Version
– Shows the disk drive’s firmware version
Capacity
– Shows the capacity of the disk drive
Unreleased Capacity
– Shows the amount of unused or unreleased capacity in the disk
drive
Disk Information
This will show SMART information of the selected disk drive if SMART function is supported
by the disk drive.
NOTE: The SMART information will be shown only if a RAID is already
created.
Controller 1: Controller Information
This will show the System Information screen contains hardware information about the
RAID subsystem such as temperature, fan speed and voltage levels.
