EN
5
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it must
be withdrawn from use and removed from any ex-hazardous areas immediately. Measures
must be taken to prevent any accidental restarting of the device. The safety of the device may
be compromised, if, for example:
Malfunctions occur.
The housing of the device shows damage.
The device has been subjected to excessive loads.
The device has been stored improperly.
Markings or labels on the device are illegible.
We recommend that a device displaying errors or in which an error is suspected be sent back
to
i.safe MOBILE GmbH
to be checked.
EX-RELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood manual, safety instructions and certificate.
The following safety regulations must also be complied with:
Inside ex-hazardous areas the covers of all interfaces must be closed.
To ensure the IP-protection, it has to be ensured that all gaskets are present and functional.
There must be no large gap between the two halves of the housing.
The device may only be charged outside ex-hazardous areas.
The device may only be charged at ambient temperatures between 5°C ... 35°C.
Physical connections to other equipment are only allowed outside ex-hazardous areas.
The device may not be exposed to any aggressive acids or alkalis.
Only accessories approved by
i.safe MOBILE GmbH
may be used.
The device may only be used in zones 2 or 22.
EX-RELEVANT SAFETY REGULATIONS FOR NORTH AMERICA
Conditions of Acceptability:
The headset connector and the USB micro connector are to be used in non hazardous areas only.
The battery may be charged outside explosion hazardous areas only using approved external
adapter model ICP12-050-2000B with output rated 5Vdc, 2A or other external approved AC/
DC adapter for use in US and Canada which also complies with the requirements of LPS and
has output rated 5Vdc, 2A.
The battery pack is placed permanently into the housing therefore do not detach the two
halves of the enclosure. It is not user serviceable or interchangeable.
In order to maintain the IP64 protection, do not detach the two halves of the enclosure.
The device must be protected from impacts with high impact energy, against excessive UV
light emission and high electrostatic charge processes.
FURTHER SAFETY ADVISES
Do not touch the screen of the device with sharp objects. Dust particles and nails may scratch
the screen. Please maintain the screen clean. Remove dust on the screen with a soft cloth
gently, and do not scratch the screen.
Summary of Contents for IS655.2
Page 1: ...IS655 2 QUICK START MANUAL SAFETY INSTRUCTIONS MODEL M655A01 ...
Page 90: ...90 ...
Page 91: ...91 ...
Page 96: ...WWW ISAFE MOBILE COM ...
