i.safe MOBILE IS-SW1.1, Quick Start Manual

Page: 6 / 88

6
DEVICE OVERVIEW/FUNCTIONS
(see illustration on page 4)
1
TOUCHSCREEN
2
POWER KEY:
A long press switches the device on/off. Depending on where you are in
the menu, a short press can have the following function:
- Switch off standby mode
- Go to menu
- Go to watch face
3
SIDE KEY RIGHT: Depending on where you are in the menu, a short press can have
the following function:
- Switch on/off standby mode
- Go to previous screen
4
SOS KEY/SIDE KEY LEFT: A long press of the SOS key sends an emergency call to a
pre-saved emergency number (only in connection with a smartphone and an installed
Lone Worker Protection app)./Optional function - function can be assigned via Compa-
nion App (system integrated in connection with a smartphone).
5
SENSORS
6
CHARGING CONTACTS
7
WRISTBAND
8
IS-DCSW1.1 DESKTOP CHARGER
9
USB INTERFACE: Connection for the i.safe PROTECTOR 2.0 USB-C Cable. Also see
sections “Charging” and “Data transfer”.
10
CHARGING CONTACTS
SWITCHING ON
Press and hold the power key for about 3 seconds.
CHARGING
Only charge the device using the IS-DCSW1.1 Desktop Charger and the
i.safe PROTECTOR 2.0 USB-C Cable supplied.
Only charge the device at ambient temperatures between 0 °C to +45 °C (+32 °F to +113 °F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
Connect the adapter suitable for your country to the power supply unit.
Connect the
i.safe PROTECTOR 2.0
USB-C Cable to the power supply unit.
Connect the i.safe PROTECTOR 2.0 USB-C Cable to the USB interface of the
IS-DCSW1.1 Desktop Charger.
Insert the IS-SW1.1 Smartwatch into the IS-DCSW1.1 Desktop Charger.
Plug the Power Adapter into a power socket and charge the device completely.