i-PRO WV-S1136, Manual

Page: 17 / 30

Issue Date: 2022-01-13 Page 2 of 7 Report Reference # E521573-A6025-UL
2 2
Supporting Documentation
The following documents located at the beginning of this Procedure supplement the requirements of this Test
Report:
A. Authorization - The Authorization page may include additional Factory Identification Code markings.
B. Generic Inspection Instructions -
i. Part AC details important information which may be applicable to products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of this Test Report.
ii. Part AE details any requirements which may be applicable to all products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of each Test Report.
iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical
standard used to investigate these products. Products are permitted to bear only the Certification Mark(s)
corresponding to the countries for which it is certified, as indicated in each Test Report.
Product Description
The product is a Network Camera for use in an indoor environment.
This equipment is supplied from the External Power Supply.
External Power Supply : That External Power Supply itself is not evaluated in this report.
Model Differences
N/A
Test Item Particulars
Product group end product
Classification of use by Instructed person
Skilled person
Supply Connection not mains connected:
ES1
Supply tolerance None
Supply connection – type External Power Supply
Considered current rating of protective device N/A
Equipment mobility stationary
wall/ceiling-mounted
Over voltage category (OVC) OVC II
Class of equipment Class III
Special installation location N/A
Pollution degree (PD) PD 2
Manufacturer’s specified Tma (°C) 50
IP protection class IPX0
Power systems not AC mains
Altitude during operation (m) 2000 m or less
Altitude of test laboratory (m) 2000 m or less
Mass of equipment (kg) 0.37
Technical Considerations
 The product was submitted and evaluated for use at the maximum ambient temperature (Tma)
permitted by the manufacturer’s specification of : 50°C