14
Major operating controls and their functions
(continued)
Rear view
①
Alarm/Control connector ALARM/CONTROL
This connector is used when connecting with an external
device such as a sensor or anti-theft door switch that
output alarm signals, or when connecting an alarm device
such as a buzzer or a lamp to the external equipment.
The two included terminal plug (12 pin) can be mounted.
②
Alarm In connector ALARM IN
It is used when connecting with an external device such as
a sensor or anti-theft door switch that output alarm signals.
The two included terminal block plugs (16) can be mounted.
③
Security wire hole
Mount the lock device for the anti-theft security wire.
④
Main monitor output connector (HDMI) [A/V
MAIN
]
This connector is used to connect to an HDMI-ready
monitor (the main monitor). It displays live images,
recorded images, or the setup menu of the recorder.
⑤
Sub monitor output connecter (HDMI) [VIDEO
SUB
]
This connector is used to connect to an HDMI-ready
monitor (sub monitor). Only the live images will be
displayed.
⑥
Cable clamp fixing hole (for fixing terminal block
cable)
This is a fitting hole for the (included) clam to tie and fix the
terminal block cables. Refer to
☞
⑦
Copy port (USB3.0) COPY [1] [2]
Connect an external storage device (external Hard disk
drive, USB memory) to this port and copy images and
audio recorded on the hard disk drive. An external
storage device can also be connected to the copy port
on the front. Use one of them.
⑧
Clamp mount (for fixing USB cable)
Fit the power cord clamp (included) to fix the USB cable.
Refer to
☞
⑨
Network port (PC port) [PC]
Connect the recorder with a PC via a network
compatible with 10BASE-T, 100BASE-TX or
1000BASE-T. Use this port when the cameras and the
PC are connected to different network.
⑩
Network port (Camera/PC port) [CAMERA/PC]
Connect the recorder with a PC and cameras via a
network compatible with 10BASE-T, 100BASE-TX or
1000BASE-T. When the port is being accessed, the
access indicator (green) blinks. When the port is being
linked, the link indicator (orange) lights.
Camera/PC
PC
(10/100/1000 BASE-T)
⑪
External storage connector EXTENSION UNIT [1]~[5]
Connect the optional extension unit to this connector
using the dedicated connection cable included in the
extension unit.
Make sure to connect the extension units in order from
external storage connector number 1.
⑫
Cable clamps fixing holes
Fit the cable clamp (include in the extension unit) to fix the
connection cable. Refer to the operating instructions of
the extension unit for further information.
⑬
Clamp mount (for fixing power cord)
Fit the power cord clamp (included) to fix the power cord.
Refer to
☞
➀
⑧
⑨ ⑩
⑪
⑫ ⑬
⑭
⑮
➁
➄ ⑥
➂
➃
⑯
⑦
⑰
