ISH HYBRID CONNECTOR Instruction Manual
Document No.
HDM-0009
13
/
24
Confidential C
4. Terminal insertion
①
Ensure that the terminal is crimped correctly and there is no damage, deform or dirt present.
②
Hold the wire to insert the terminal as shown in Fig.25.
③
Insert the terminal into the corresponding corehole of the housing, as deeply as possible, in the
orientation as shown in Fig. 25.
④
Once the terminal is inserted, ensure that the terminal retention is fastened by pulling the wire
lightly towards you.
Notes:
①
Terminals must be inserted in the orientation instructed. Forcibly inserting terminals in any other orientation
may result in damage or deformation. Furthermore,if the terminals are inserted with incorrect orientation,
terminal key prevents insertion into coreholes. (see Fig.26)
②
Once the terminal is inserted, do not apply excessive pulling force to the wire.
Fig26.Incorrect terminal insertion
Hold the wire
Keys prevent incorrect insertion
Polarization key (underside)
Insert the terminal as deeply as possible
Fig 25.Terminal insertion direction
