i-onyx VN-855, Installation & Operation Manual

Page: 20 / 37

XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera
14
SPECIAL
-
In Special menu, if AP key is pressed, Blemish, Priority, Posi/Nega, and Sharpness can be
adjusted.
Blemish
Blemish Mode is selectable between ON and OFF using Pan Left/Right.
When BLEMISH is “ON”, it compensates for pixels with uneven light levels (white spots).
Caution: Before selection of Blemish ON, lens must be covered so the sunlight is blocked to the
CCD.
Priority
Set Priority using Pan Left/Right on Priority Mode. Set to Remote to use the OSD menu system. (This
must be set before making any other menu selections for the settings to take effect.) When setting to
DIP SW, menu setting values will not be applied. Use the DIP switch on the rear of the camera for
settings.
POSI/NEGA
In Posi/Nega mode, brightness of video shows (+: normal, -: reverses to negative image).
Sharpness
In Sharpness mode, outline of video image can be controlled.
At high level, outline is clear; however, when level is too high, noise can occur.
(SPECIAL)
BLEMISH OFF
PRIORITY DIP SW
POSI/NEGA +
SHARPNESS 96
Use AI to exit
LENS
MANUAL
4
WDR BLC
DAY/NIGHT COLOR
4
AWB AWC
SPECIAL
4
EXIT QUIT
Use
▲ ▼ ◀ ▶
, AP to select