14
15
2. FIRST SET-UP
2.1. CHARGING THE BATTERY
Before using your I LOCK IT GPS for the first time, you should
fully charge the battery. To do this, follow these steps:
I. Open the USB cover on the right side of I LOCK IT GPS.
II. Connect the supplied USB magnetic charging cable to the
magnetic charging port on I LOCK IT GPS.
FIRST SET-UP
FIRST SET-UP
III. Connect the USB magnetic charging cable to a USB-power
adapter, battery pack or the USB port of a computer.
To charge I LOCK IT GPS use only
voltage sources, which supply the USB output
with 5 V direct voltage (DC).
While I LOCK IT GPS is charging, the button LED
lights up red. When the battery is full, the LED
goes out.
If there is no power outlet near the bicycle
we recommend charging by using a battery pack to
avoid disassembly from the bike.
IV. Once I LOCK IT GPS is fully charged, you can remove the
USB magnetic charging cable and close the USB cover
again.
If the battery reaches a low charge level, an
acoustic warning tone will sound each time the
lock is opened. The battery should then be
charged to ensure that I LOCK IT GPS is ready
to use.
