20
21
2.3. MOUNTING ON THE BIKE
I LOCK IT GPS is permanently attached to the seat stays of
your bike. For mounting I LOCK IT GPS has three different
openings. Through these openings I LOCK IT GPS can be
mounted at the optimal height.
I LOCK IT GPS should only be mounted on the
rear wheel. Mounting on motorcycles such as
scooters, motorcycles or S-pedelecs (pedelecs
with up to 45 km|h support) is not permitted.
Mount I LOCK IT GPS in such a way that there is
enough clearance to the mudguard. Only then
the spoke avoidance can be guaranteed at the
locking process.
MOUNTING FOR BIKES WITH THREADED SOCKETS
If your bike already has threaded sockets for screwing on
frame locks, please follow these instructions:
Most city, trekking and e-bikes have threaded so-
ckets. On some models they may be protected by
plastic covers. These covers must be removed
before mounting I LOCK IT GPS.
FIRST SET-UP
FIRST SET-UP
I. Screw the
flex adapters
by hand into the threaded
sockets (1) of your bike and tighten the flex adapters
(2) hand-tight (3Nm).
II. Place I LOCK IT GPS over your mudguard | tire.
III. Tighten the
I LOCK IT GPS to the
flex adapters
by
hand with an Allen key (3Nm). Use the supplied
mounting screws.
Our I LOCK IT Channel on
www.youtube.de presents a video
on the subject of mounting.
www.youtube.com/ILOCKIT-bike
1
2
