I-GO S20, Owner'S Manual

Page: 9 / 80

i-Go™
9
E
N
I I . YO U R S C O O T E R
Charger Power Cord Receptacle
The 3-pin end of the charger power cord plugs into this
receptacle. See fi gure 4.
Off-Board Battery Charger
The off -board battery charger, when plugged into the charger
power cord receptacle and a standard electrical outlet,
charges the scooter’s batteries.
See fi gure 4.
Manual Freewheel Lever
Whenever you need or want to push your scooter for short
distances, you can put it in freewheel mode.
1. Remove the key from switch.
2. Push circuit breaker button towards front of scooter.
3. Locate the manual freewheel lever near the front wheel.
See fi gure 5.
4. Push downward on the manual freewheel lever to disable
the drive system and the brake system. You may now
push your scooter.
5. Pull the manual freewheel lever upward to reengage the
drive and the brake systems; this takes your scooter out
of freewheel mode.
WARNING! When your scooter is in freewheel
mode, the braking system is disengaged.

Disengage the drive motors only on a
level surface.

Ensure the key is removed from the key
switch.

Stand to the side of the scooter to
engage or disengage freewheel mode.
Never sit on a scooter to do this.

After you have fi nished pushing your
scooter, always return it to the drive
mode to lock the brakes.
IDENTIFICATION KEY
1. Manual Freewheel Lever
Figure 5. Freewheel Lever
Figure 4. Off-board Battery Charger