Gemini Instruction Manual I-GARD
3
Figure 1 Close up of Front Panel
2
INSTAllATION
DANGER
Hazard of Electrical Shock, Burn or Explosion
Qualified personnel must perform all installation, servicing and testing referred
to in this manual. All power should be disconnected prior to removing covers or
enclosures and where live conductors may otherwise be exposed.
Failure to observe these precautions may result in death or severe
personal injury.
!
Catalogue Numbers for the Gemini are GS-480-5 for 480V and GS-600-5 for 600V, 5A resistor units.
Please ensure before installation of the unit that the correct version has been supplied!
On receipt, carefully open the protective shipping carton, remove all packing material and visually inspect the
unit. If the unit is damaged do not proceed with installation. Contact I-Gard at the numbers listed on the final
page of this document.
Loosen the two door bolts and open the front door to access the mounting holes.
Gemini is housed in a NEMA 3R enclosure, see Figure 4 for installation details.
