background image

4.6 Deleting Stored Measurements

If the left button is held down more than 5
seconds, a signal will be heard and the display
shows „Clr“. If the left button is held down 
another five seconds, all stored measurements 
up to this date will be deleted and the time
modus will appear again.

Please Note:

Measurements should be taken whilst seated
after 3–5 minutes of relaxation.

6

4 Use Of The Device

4.4 Evaluation By The Doctor

Blood pressure values stored in the 

“Klock”

can

be downloaded to a computer by your doctor
using an evaluation software. The doctor can
obtain further details on this by contacting the
local supplier. Consult your doctor.

4.5 Display Previous Measurements

First press and hold the right button until the dis-
play begins to flash. Then press the left button.
The previous blood pressure value is displayed fol-
lowed by the recording time and date. You can
page backwards to other measurements by repea-
tedly pressing the left button. Press the right but-
ton or wait 30 seconds without pressing any but-
tons to exit this mode. 
The above is only available if measurements have
been stored in the 

“Klock”

. If not the display will

go directly to setting the time after pressing the
right button (see: Setting Time And Date).

4.3 Blood Pressure Measurement
And Storing Results

Push the left button briefly once. As long as
the button is held down, you should see the 
following in the display:

“Klock” 

will inflate and deflate in steps. After

the measurement the display will show the 
following:

The measurement number will blink (here No.:
27). After 10 seconds this 
measurement will be stored under this number 
If the left button is pushed once during blinking,
the measurement will not be stored.

4 Use Of The Device

4.7 Setting Time And Date

Repeatedly press and hold the right button
until MON, DAY, HOUR and MIN start to flash.
Then press the left button several times until
the minute (MIN) setting is correct. Now press
the right button to select hour (HOUR) and
then afterwards date (year, MON, DAY). You can
again set the correct numbers with the left but-
ton. You can exit this mode, by waiting 30
seconds without pressing any buttons or by
pressing the right button until the year disap-
pears.

4.8 Reminder Function
“Klock”

is able to remind you, for instance, 

to take your medication. An audible signal 
will be heard. The setting of the different times
(up to 5) can only be done at your doctor’s 
office if equipped with special computer 
software. 

7

Summary of Contents for klock

















Reviews: