i Display XL Retail Tablet, User Manual

Page: 15 / 24

15
Playing Content
order:
car-choice-banner.jpg
car-choice-banner.mpeg
top-of-range.mpeg
then the tablet will first display the car-choice-banner.jpg image for three seconds,
and then play the discount-car.mpeg video and then play the top-of-range.mpeg
video.
The tablet will then repeatedly play this sequence in a loop.
Connect Box – Selecting Folders 1 – 12
The Retail Tablet can also play the content of folders named from 1 to 12 if a
Connect Box is connected to it. This Connect Box has 12 connectors for push
buttons or touch sensors and 1 connector for motion sensor.
The Retail Tablet plays the content of Folder 0 by default. If one of the Connect Box
buttons is pressed, then the Retail Tablet plays the same numbered folder once.
After it finishes:
The content of Folder 0 will then play repeatedly.
If button number 1 is pressed on the Connect Box, then the content of Folder 1 is
played once and then the content of Folder 0 is played repeatedly.
Motion Sensor
The Retail Tablet can also have an additional connector for a motion sensor. The
motion sensor enables the Retail Tablet to play the content of a folder named MS,
as follows:
ON Mode
This option enables you to set up the Retail Tablet so that by default it plays
the contents of Folder 0 until the sensor detects motion. Then the Retail Tablet
automatically starts playing the content of the MS folder.
The content in the MS folder is played repeatedly as long as motion is detected.
When motion is no longer detected, the tablet goes back to playing the content
of Folder 0 repeatedly. If the tablet is playing an application and it is not touched
for more than three minutes, then it returns to playing the content of Folder 0
repeatedly.
You may refer to the
http://www.i-display.com/products/retail-tablet-xl-technical-specification
to download the latest Retail Tablet specification sheet to download the latest
Retail Tablet specification sheet.
Barcode Reader – Plays Per Barcode
•
•
•
•
•