background image

10 

QUICK TROUBLESHOOTING 

THE DECIMALS ON THE 4  
DISPLAYS ARE LIT UP 
 
 
 
 
NO GAME POWER 
 
 
 
 
 
 
GAME WILL NOT TAKE MONEY 
OR GIVE CREDITS CORRECTLY 
 
 
 
 
 
DISPLAYS DO NOT WORK 
 
 
 
 
CRANE OR WAGON DOES NOT 
MOVE 
 
 
 
 
CRANE KEEPS TRYING TO 
MOVE IN TO THE HOME  
POSITION 
 
CLAW WILL NOT CLOSE 
 
 
 
 
CLAW STAYS CLOSED 
 
 
CLAW GOES DOWN AND THEN 
UP BUT DOES NOT CLOSE 
 
 
CLAW COMES UP AND ABOUT 
10 SEC. PASSES BEFORE 
CRANE MOVES TO THE HOME 
POSITION 
 
CRANE OR WAGON WHEELS 
SLIP 
 
 
 

THIS IS IN FACT NOT A PROBLEM BUT A WAY 
OF LETTING THE OPERATOR KNOW THAT 
THERE WAS A PROBLEM DURING THE START 
UP MODE 
 
 
ON-OFF SWITCH ON THE GAME IS TURNED OFF 
BLOWN A.C. POWER FUSE 
GAME NOT PLUGGED OR CORD DAMAGED 
BAD TRANSFORMER 
TRANSFORMER HARNESS NOT CONNECTED 
BAD POWER MODULE 
 
BAD COIN SWITCH 
COIN DISCOUNTING SET WRONG 
COINS PER CREDIT SETTING INCORRECT 
BAD COIN MECHANISM 
LOOSE OR DAMAGED HARNESSING 
BAD MAIN P.C. BOARD 
 
BAD 12V FUSE 
BAD DISPLAY P.C. BOARD 
BAD MAIN P.C. BOARD 
LOOSE OR DAMAGED DISPLAY HARNESSING 
 
BAD MOTOR 
LOOSE OR DAMAGED HARNESSING 
BAD SWITCH ON BUTTON OR JOYSTICK 
BAD HARNESSING TO BUTTONS OR JOYSTICK 
BLOWN FUSE TO MOTORS ON MAIN P.C.B. 
 
BAD LIMIT SWITCH (S) 
LIMIT SWITCH NOT ALIGNED WITH ACTUATOR 
 
 
BLOWN FUSE TO CLAW ON MAIN P.C. BOARD 
BAD COIL 
LOOSE OR DAMAGED HARNESSING 
CLAW HAS MECHANICALLY JAMMED 
 
BAD DRIVE TRANSISTOR ON MAIN P.C.B. 
CLAW HAS MECHANICALLY LOCKED 
 
DOWN SWITCH BAD 
LOOSE OR DAMAGED HARNESS TO DOWN 
SWITCH 
 
UP SWITCH BAD 
LOOSE OR DAMAGED HARNESS TO UP SWITCH 
BROKEN “UP” SPRINGS 
 
 
MISSING OR DAMAGED O-RING DRIVE BELTS 
LOOSE SET SCREWS IN WHEELS 
LOOSE SET SCREWS IN DRIVE COUPLER 
RAILS NEED TO BE SCUFFED 
 
 
 
 
 
 

OPEN THE FRONT DOOR AND THE 
ERROR CODES ARE SHOWN ON THE 
DISPLAYS. TO ADVANCE THROUGH 
THE ERROR CODES, PRESS THE 
FIRE BUTTON 
 
TURN POWER ON 
REPLACE WITH PROPER FUSE 
CHECK POWER CORD 
CHECK FOR PROPER VOLTAGES 
CHECK HARNESS 
REPLACE POWER MODULE 
 
CHECK W/METER AND REPLACE 
CHECK PROGRAMMABLE SETTING 
CHECK PROGRAMMABLE SETTING 
ADJUST OR REPLACE 
CHECK W/METER—REPAIR 
REPAIR OR REPLACE MAIN BOARD 
 
REPLACE WITH PROPER FUSE 
REPAIR OR REPLACE P.C. BOARD 
REPAIR OR REPLACE P.C. BOARD 
CHECK W / METER AND REPAIR 
 
REPLACE MOTOR 
CHECK W / METER—REPAIR 
REPLACE SWITCH 
CHECK W / METER—REPAIR 
REPLACE WITH PROPER FUSE 
 
REPLACE SWITCH (S) 
ALIGN SWITCH AND ACTUATOR 
 
 
REPLACE WITH PROPER FUSE 
REPLACE COIL 
CHECK W / METER AND REPAIR 
FIND JAM AND REPAIR 
 
REPLACE TRANSISTOR 
FIND JAM AND REPAIR 
 
REPLACE DOWN SWITCH 
CHECK W / METER AND REPLACE 
 
 
REPLACE UP SWITCH 
CHECK  W / METER AND REPLACE 
REPLACE SPRINGS 
 
 
REPLACE O-RING BELTS 
TIGHTEN SET SCREWS 
TIGHTEN SET SCREWS 
SCUFF TOP OF RAILS WITH  
SANDPAPER 

PROBLEM 

PROBABLE CAUSE 

SOLUTION 

Summary of Contents for Crane WH6-120-6









































Reviews: