I-Bus IBC 2606 User Manual Download | Manualshive

Page: 2 / 46

background image

2

IBC 2606 User's Guide









Copyright 2004

All Rights Reserved
The information in this document is subject to change without prior notice in order to improve reliability, design, and
function, and does not represent commitment on the part of the manufacturer. In no event will the manufacturer be liable
for direct, indirect, special, incidental, or consequential damages, or the possibility of such damages, arising out of the use
of this information.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual
may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the
manufacturer.

Trademarks

Award is a trademark of Award Software International, Inc.
Fast EtherChannel (FEC) is a trademark of Cisco Systems, Inc.
IBM, PS/2, OS/2, and VGA are trademarks of International Business
Machines Corporation. Intel, Pentium, and PRO/100+ are trademarks of Intel Corporation.
Windows is a registered trademark of Microsoft Corporation.
NetWare is a trademark of Novell, Inc.
Symbios is a trademark of Symbios Logic Corporation.
PICMG™, CompactPCI™ and the PICMG™, and CompactPCI™ logos are trademarks of the PCI Industrial Computers
Manufacturers Group.Other product names mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective companies.

CE Notification

The IBC 2606 has passed the CE test for environment specification when shielded cables are used for external wiring. We
recommend the use of shielded cables.

Customer Service

Worldwide Headquarters

I-Bus Corporation

3350 Scott Blvd, Building 54

Santa Clara

CA 95054, USA

Tel: +(1) 408 450 7880

Fax: +(1) 408 450 7881

Toll Free: 877-777-IBUS

Email: [email protected]

European Headquarters

I-Bus

Unit 6, Chichester Business Park

City Fields Way, Tangmere

West Sussex, PO20 2LB, UK

Tel: +44 (0) 1243 756300

Fax: +44 (0) 1243 756301

Email: [email protected]

France, Italy

I-Bus

B.P 45 Valbonne

06901 Sophia Antipolis CEDEX

France

Tel: +33 (0) 493 004 360

Fax: +33 (0) 493 004 369

Email: [email protected]

«
1
2
3
4
...
»

Summary of Contents for IBC 2606















































Reviews:

No comments

Related manuals for IBC 2606

Brand: AKM Pages: 34

Pentium P5I430TX/IIB TITANIUM IIB

Brand: QDI Pages: 53

CVN X570 GAMING PRO V14

Brand: Colorful Pages: 64

Brand: Gigabyte Pages: 58

cpuModules CME34BT

Brand: rtd Pages: 110

Brand: Biostar Pages: 71

Brand: Gigabyte Pages: 17

Brand: Shuttle Pages: 81

Brand: Infineon Pages: 14

Brand: Intel Pages: 112

Brand: Watersnake Pages: 24

Brand: Acorp Pages: 26

Brand: DFI Pages: 92

BOXD945GCLL - Socket 775 MicroATX Motherboard

Brand: Intel Pages: 90

Brand: Texas Instruments Pages: 28

Brand: Siemens Pages: 15

Brand: Siemens Pages: 26

Brand: Siemens Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands