user manual
IBU3 User Manual rev. 1.0
I.B.U. Electronics
http://www.ibu-electronics.com
Ibu3 configurator
To best use the PC application in combination with the IBU3 module you should follow the instructions below.
Minimum system requirements, Windows 7 or higher, make sure that you OS is updated to latest version
Download the PC Configurator software and install it on the PC in use
During installation you may be asked to install .NET Framework components for Windows, this will be done automatically but
requires active internet connection
Download the VirtualComPort drivers and install them on the PC in use
Connect the female USB adapter cable(provided) to IBU3 module
Connect your PC to IBU3 module using a USB cable Male / Male Type A (not supplied)
CAUTION
despite the USB port of IBU3 module is protected against short circuits is recommended to connect to the PC usb ONLY with IBU3
module switched off
Power the IBU3 module
the green LED on the CPU module flashes for a few seconds during the self-test after which it is steady
The USB yellow LED on (if the module is connected to the PC)
Run the IBU3 Configurator