FEATURES OF YOUR HYUNDAI
1- 50
B680A01L-GAT
HEATING AND VENTILATION
ROTARY AND PUSH BUTTON TYPE
(If installed)
There are four controls for the heating and
cooling system. They are:
1. Fan speed control.
This is used to turn the fan on and select the
fan speed.
2. Air intake control.
This allows you to select fresh outside air or
recirculation inside air.
3. Temperature control.
This is used to turn the heating system on
and off and to select the degree of heating
desired.
B690A01L
1
2
3
4
o During normal cruise control operation,
when the "SET" button is activated or
reactivated after applying the brakes, the
cruise control will energize after approxi-
mately 3 seconds. This delay is normal.
B620A01S-AAT
FRONT DOOR EDGE WARNING
LIGHT (If Installed)
A red light comes on when the front door is
opened. The purpose of this light is to assist
when you get in or out and also to warn passing
vehicles.
B620A01L
B660F01L-AAT
To Reset at a Slower Speed
1. Push the control button "SET (COAST)".
The vehicle will decelerate.
2. When the desired speed is obtained, release
the control button. While the control switch is
pushed, the vehicle speed will gradually de-
crease.
WARNING:
o Keep the main switch off when not using
the cruise control.
o Do not use the cruise control when it may
not be safe to keep the car at a constant
speed, for instance, driving in heavy or
varying traffic, or on slippery (rainy, icy
or snow-covered) or winding roads or
over 6% up-hill or down-hill roads.
o Pay particular attention to the driving
conditions whenever using the cruise
control system.
B660B01L
