EN - 38
Barometric Pressure Reading
• Barometric Pressure show the Relative pressure you can adjusted the sea level’s pressure
by holding “HISTORY” button (B7) for 3 seconds. Press “ ▲“ (B8) or “▼“ (B9) key to adjust,
press “HISTORY” button (B7) to confirm. Check the Local Weather Station for Sea Level
pressure.
• Press “ HISTORY” button (B7) to view the past 12 hours Barometric Pressure history.
• The hour is indicated on LCD-A10.
Press “HISTORY” button (B7)
• Press “ HISTORY” button (B7) to view the past 12 hour Barometric Pressure history.
• The hour is indicated on the LCD.
• 0 HR = Current Barometric Pressure Reading
• -1HR = Barometric Pressure Reading in 1 hour ago
• -2HR = Barometric Pressure Reading in 2 hour ago ……..etc
• Hold “▲” button (B8) for three seconds to select the unit for Barometric Pressure Meter in
inHg or mb / hPa.
Barometric Pressure Trend Bar Chart.
• The Barometric Pressure Reading at –1hr, -2hr, -3hr,-6hr and –12hr is recorded and shown
on Barometric Pressure Bar Graph (A8). The Graph is displayed in both hPa and inHg.
Thermometer:
• Press “-” button (B4) to select OUT Temperature to be displayed in Celsius mode or Fahren
-
heit mode.
• Press “IN-°C / °F” button (B9) to select INDOOR Temperature to be displayed in Celsius
mode or Fahrenheit mode.
• If the temperature is out of the measurable range, LL.L ( beyond the minimum temperature) or
HH.H (beyond the maximum temperature) will be shown on the LCD.
Maximum/Minimum Temperature/Humidity recording function:
• Press “IN-MEM” button (B10) to show the maximum or minimum of indoor temperature and
huimidity.
• “
” is shown on the LCD if maximum Temperature/Humidity is shown.
• “
” is shown on the LCD if minimum Temperature/Humidity is shown.
• Hold “IN-MEM” button (B10) for 3 seconds to clear the recorded maximum and minimum
reading.
• Press “OUT-MEM” button (B11) to show the maximum or minimum of out door temperature
and huimidity. The operation is same as indoor IN-MEM.
Outdoor Thermo /Humidity Sensor Unit Registration Procedure:
• The main unit automatically starts receiving transmission from Outdoor Thermo/Tumidity Sen
-
sor after Weather condition setting. Outdoor temperature/Humidity digits (A9) blinks.
• Insert the batteries in the outdoor Sensor Unit. The sensor unit automatically transmit tem
-
perature/humidity to the main unit. ( Battery compartment (D5) of outdoor sensor is located
behind the back cover, unscrews to open.)
Summary of Contents for WSC1928
Page 51: ...Pozn mky Notes Notatky...
Page 52: ......
