PL - 40
Thermo Sensor
Unit Appearance
D1: Transmission Indication LED
D5: Battery Compartment
D2: Outdoor Temperature
D6: „°C / °F“ button
D3: Wall Mount Hole
D7: “TX” button
D4: Channel Select Switch
D8: Stand
D9: Temperature Sensor Probe Plug & Jack
Set Up
Insert batteries.
Use a pin to press the RESET (B12) button
Weather Forecast Function
After Batteries inserted, or holding “WEATHER” button (B6) for 3 seconds, Weather Icon
(A13) blinks. Enter the current weather condition by pressing “▲“ (B7) or “▼“ (B8) buttons.
Press “WEATHER” button (B6) to confirm the setting. The weather forecast may not be accu
-
rate if the current weather condition entered is not correct.
The current weather status should be entered again if the altitude of the weather station is
changed. ( Barometric pressure is lower at higher altitude location. Therefore, altitude change
will affect the weather forecast). The weather station will start the first forecast at 6 hours after
the current weather status is entered
Totally 5 different weather condition in the weather forecast.
means Sunny
means Slightly Cloudy
means Cloudy
means Rainy
means Cloudburst
-
-
-
-
-
Summary of Contents for WSC 1908 GIRL
Page 48: ...Poznámky Notes NotATkY ...
Page 49: ...Seoul Korea ...
