EN - 44
Thank you for purchasing the new generation of professional weather station. Designed
and engineered with the state-of-art technology and components, this instrument will provide
accurate and reliable measurement of wind speed & direction, wind chill, daily/weekly/monthly/
accumulated rainfall, barometric pressure, weather forecast, indoor/outdoor humidity,
temperature, heat index & dew point as well as radio-controlled alarm clock.
Read this manual carefully to fully explore the features and functions of the new product.
IN ThIS PACKAGE YOU wILL fIND:
-
One monitor (Receiver)
-
One anemometer (Transmitter – transmit wind & outdoor Channel-1
temperature/humidity data)
-
One rain gauge (Transmitter – transmit rainfall data)
-
Mounting hardware for rain gauge (2 sets of screws & plastic screw plugs)
-
Mounting hardware for anemometer (2 pieces of U-shape metal plate, 4 sets of Hex screws
& nuts)
-
One owner’s’ manual
-
One 6.0V adapter
Additional tools needed for installation
-
Small Phillips screwdriver
-
Hexagonal Key
-
Electric drill
-
Pencil
-
Level
-
Mast, 1 – 1.25 inch (2.54 – 3.18 cm) in diameter (to mount the anemometer)
INSTALLATION
The weather station operates at 433MHz and does not require wire installation among
the component parts. To ensure successful installation and the best performance,
we recommend you follow the installation instructions in the order they appear in this manual.
1. Battery & adapter installation for the monitor (receiver)
• Main Power source:
Plug in the adapter jack into the back side of the unit for basic
operation and continuous backlight.
• Backup Power:
Open the battery door and insert 3 pieces of AAA batteries according
to the polarity indicated, close the battery cover.
Sea level pressure setting
After battery/adapter installation, the monitor will enter sea level pressure setting mode directly
and the pressure reading will flash. Press “▲” or “▼” to set the sea level pressure value. Press
“PRESSURE” to confirm the setting and exit. This allows the unit to provide a more accurate
weather forecast & pressure reading.
You can also set the sea level pressure any time after the installation is completed. For more
information, see “WEATHER FORECAST & BAROMETRIC PRESSURE” section.
Note: you may obtain the current sea level pressure from the weather web site for your
locate area.
2. Selecting a location for the anemometer
Select a mounting location for the anemometer that is:
-
Outdoors, not blocked on top or sides, so wind can freely reach the anemometer
-
Within 50 meter (164 feet) open area from the monitor. Reduce distance if obstacles
is between the anemometer & the monitor.