If a gas leak is detected, proceed as follows:
1. Check the torque on the connection fittings and, if too loose, tighten to the proper torque. Check for gas leakage with a
leak detector (A).
2. If leakage continues even after the fitting has been tightened, discharge the refrigerant from the system, disconnect the
fittings, and check their seating faces for damage. Always replace, even if the damage is slight.
3. Check the compressor oil and add oil if required.
4. Charge the system and recheck for gas leaks. If no leaks are found, evacuate and charge the system again.
Heating,Ventilation, Air Conditioning > Air Conditioning System > Components and
Components Location
Component Location Index
Engine Room
https://www.hyundaitechinfo.com/viewer/toc_print.asp?vehicletype=Pas...
9 of 57
3/12/2012 8:27 PM