ENG - 34
CLEANING AND MAINTENANCE
Always remove the power plug from the wall outlet before carrying out any maintenance.
If the suction power of your machine is getting lower, you must change the dust bag and clean
the filter. To do so, please follow the instruction below.
1. Open the front cover, fig 1.
2. Push the bag holder to remove the dust bag, fig 2.
3. Remove the dust bag, fig.3.
4. Insert the new dust bag to the right place in the base and pushback the bag holder.
Fig.1
Fig.2
Fig.3
Motor protection filter
The motor protection filter cleans the air that is sucked in before it enters the motor.
The air is cleaned of fine dusts, mites, bacteria and viruses. This prevents dirt or dust particles
from getting into the motor or the surrounding air.
Fig.4
Fig.5
1. Take out the dust filter bag
2. Remove the air inlet filter (Fig.4, Fig.5) to rinse and allow the filter to dry, then insert air inlet
filter or a new filter and close the front cover.
Summary of Contents for VC 926
Page 51: ...Pozn mky Notatka Notes Megjegyz s...
Page 52: ......
