IV. USE OF VACUUM CLEANER
Before use, unwind (by pulling) the power cable
A5
from the vacuum cleaner to a required
length and plug the vacuum cleaner to the mains.
CONTROL
A1
button
-
vacuum cleaner ON/OFF switch
A2
button
-
when pressed and held, the unwound part of the power cable
rewinds back inside
slide control
A3
-
by sliding it to the right, you increase the suction power
-
by sliding it to the left, you reduce the suction power
V
. REMOVING THE DUST CONTAINER AND FILTERS
Caution
– Maximum suction performance can be achieved when the filters are clean and the
dustbag is empty.
–
Every time you empty the dust container, we recommend that you also clean the filters.
– When you are vacuuming very fine dust, the filter pores might get clogged. This reduces
the air flow and the suction performance deteriorates. In such a case, the filters need to
be cleaned even though the container is not full yet.
DUST CONTAINER REMOVAL
When taking out the dust container
B
follow the procedure indicated in Fig. 3. Dispose of
dirt contained in the dust container with regular household waste. An emptied and cleaned
container is to be put back into the vacuum cleaner in reverse order.
INPUT HEPA FILTER REPLACEMENT
To remove the input filter, follow the procedure indicated in Fig. 3. To fit a new input filter
in the vacuum cleaner, proceed in reverse order. A used filter is to be disposed of with
regular household waste.
OUTPUT HEPA FILTER REPLACEMENT
To remove the input filter, follow the procedure indicated in Fig. 4. To fit a new output filter
in the vacuum cleaner, proceed in reverse order. A used filter is to be disposed of with
regular household waste.
VI. CLEANING AND MAINTENANCE
Treat surface of the appliance with a soft and damp cloth, do not use coarse and aggressive
detergents!
Accessories
After any vacuuming it is recommended to check visually the brushes or collectors for
possible impurities. If there are some impurities, remove them.
Input and output filters
Shake out the HEPA filter (
A8, B7
) gently, or blow it out. If the HEPA filter is very dirty, you
can rinse it under running lukewarm water. Allow it to dry out properly.
25 / 32
