POWER CORD:
– Check whether the data on the type label corresponds with the voltage in your socket.
The power cord plug may only be connected to the electrical socket complying with the
applicable standards.
–
If the power cord of the appliance is corrupted, it has to be replaced by
the manufacturer, its service technician or a similarly qualified person.
–
Always disconnect the appliance from power by unplugging
the power cord from the electrical socket, if the appliance is left
unattended and before assembly, disassembly or cleaning.
–
Never use the appliance if the power cord or power plug are
damaged, if the appliance is not correctly operating or if it has fallen
on the floor and been damaged, or if it has fallen into water.
– Do not apply force to unwind the cord beyond the red mark.
– Do not unplug the power plug by pulling the power cord or the vacuum cleaner unit.
– When winding the cord, hold the plug to prevent lashing of the cord around and to prevent
possible injury.
– The power cord must not be damaged with sharp or hot objects, open fire, it must
not be sunk into water or bent over sharp edges.
II. EQUIPMENT AND ACCESSORIES
A
–
vacuum cleaner
(Fig. 1, 2, 4)
A1 –
ON/OFF
( ) button
A2 – power cord winding button
A3 –
slide control for suction power
A4 –
depression for attachment of accessories
A5 – power cord
A
6 – rear wheels
A7 – exhaust grid
A8 – output HEPA filter
B – dust c
ontainer
(Fig. 3)
B1 –
suction vent
B2 – cover
B3 – holder
B4 –
container lock button
B5 – bottom lock button
B6 – bottom flap
B7 – HEPA filter
B8 – separator
C – accessories
(Fig. 1)
C1 –
floor nozzle
C2 – upholstery nozzle
C3 – crevice nozzle
C4
– brush
C5 – suction hose
C6 – suction tube
C7 – telescopic suction tube locking
C8 –
mechanical suction power regulator
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories.
Remove all possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1.
Choose appropriate accessories as required (
C1
-
C4
) (Fig. 5). The telescopic suction tube
C6
can be set to an optimum length to suit the user´s height.
EN
24 / 32
