Voice Recognition
58
Starting Voice
Recognition
Starting Voice Recognition
Shortly press the
key on the
steering wheel (under 0.8 seconds)
▶
Say a command.
Once voice recognition starts, the voice
command entry window and the six rep-
resentative commands are displayed.
•
If voice recognition is in [Normal
Mode], then the system will say
“Please say a command after the
beep,” followed by a beep tone.
•
If voice recognition is in [Expert
Mode], then you will only hear a beep
a “Beep~”
Skipping Prompt Messages
While prompt message is being stated
▶
Briefly press the
key on the
steering wheel. (under 0.8 seconds)
The prompt message is immediately
ended and the beep tone will sound. After
the “beep”, say the voice command.
Re-starting Voice Recognition
While system waits
▶
Briefly press
the
key on the steering wheel.
(under 0.8 seconds)
The command wait state will end and
the beep tone will sound. After the
“beep”, say the voice command.
Voice Recognition and Phone
Contact Tips
The Voice Recognition System may
have difficulty understanding some
accents or uncommon names When
using Voice Recognition to place a call,
speak in a moderate tone, with clear
pronunciation. To maximize the use
of Voice Recognition, consider these
guidelines when storing contacts:
•
Do not store single-name entries
(e.g., “Bob”, “Mom”, etc.). Instead,
always use full names (including first
and last names) for these contacts
•
Do not use special characters (e.g.,
‘@’, ‘-’, ‘*’, ‘&’, etc.)
•
Do not use abbreviations (i.e., use
“Lieutenant” instead of “Lt.”) or acro-
nyms (i.e., use “County Finance
Department” instead of “C. F. D.”; Be
sure to say the name exactly as it is
entered in the contacts list.
H_LMFC_G3.0[USA_N]QRG.indd 58
_G3.0[USA_N]QRG.indd 58
2015-07-22 오후 2:59:02
2015-07-22
