manualshive.com logo in svg

Hyundai Tucson 2014, Owner'S Manual

Share
Download
Hyundai Tucson 2014 Owner'S Manual Download Page 494

7-67

7

Maintenance

✽

NOTICE

If the main fuse is blown, even
though the engine compartment
panel fuse and inner fuse are not
blown, if the electrical system is not
operated, the main fuse may be
blown. The main fuse is connected
with other parts and system. We rec-
ommend that you contact an author-
ized HYUNDAI dealer.

Multi fuse

If the multi fuse is blown, it must be
removed as follows:
1. Disconnect the negative battery

cable.

2. Remove the bolts shown in the

picture above.

3. Replace the fuse with a new one

of the same rating.

4. Reinstall in the reverse order of

removal.

✽

NOTICE

If the multi fuse is blown, we recom-
mend that you consult an authorized
HYUNDAI dealer.

OLMB073036

Summary of Contents for Tucson 2014



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands